BRJZM - ANAEROBIC ADHESIVE/SEALANT
- MSDS: BRJZM
- Manufacturer: SAF T LOK CHEMICAL CORP
- Product Name: ANAEROBIC ADHESIVE/SEALANT
- National Stock Number: 8030-00-081-2325
Product Identification
Product ID:ANAEROBIC ADHESIVE/SEALANT
MSDS Date:06/01/1991
FSC:8030
NIIN:00-081-2325
MSDS Number: BRJZM
Responsible Party
LOMBARD, IL 60148
US
Emergency Phone: 708-971-2001
Info Phone: 708-971-2001
Cage: 4Z400
Contractor
Telephone: 708-971-2001
Cage: 4Z400
Ingredients
METHACRYLIC ESTER MONOMERS
Fraction By Weight: 25-70%
ORGANIC PEROXIDE
Fraction By Weight: <5%
SACCHARIN (SARA III)
CAS: 81-07-2
RTECS: DE4200000
Fraction By Weight: <1%
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
Hazards
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ORGANIC PEROXIDE HAS BEEN REPORTED TO
CAUSE TUMORS IN EXPERIMENTAL ANIMALS WHEN INJECTED UNDER THE SKIN.
THE LOW CONCENTRATION (<5%) CONTAINED IN THE PRODUCT SHOULD PRESENT
NO DANGER WHEN USED PROPERL Y UNDER NORMAL CONDITIONS.
Explanation of Carcinogenicity:SACCHARIN,(LRG AMTS OVER PROLONGED
PERIODS) REPORTED TO CAUSE TUMORS IN ANIMALS. <1% CONC(MAT'L)SHOULD
PRESENT NO DANGER
Effects of Overexposure:PROLONGED SKIN CONTACT MAY CAUSE DERMATITIS IN
SENSITIVE INDIVIDUALS.
First Aid
First Aid:SKIN AND EYE CONTACT: FLUSH WITH WATER. INGESTION: KEEP CALM,
REMOVE TO FRESH AIR. DO NOT INDUCE VOMITING. OBTAIN MEDICAL
ASSISTANCE.
Fire Fighting
Flash Point Method:TCC
Flash Point:200F,93C
Extinguishing Media:CO2, FOAM, DRY CHEMICALS
Fire Fighting Procedures:AIR MASK AND PROCEDURES FOR FIGHTING CHEMICAL
FIRES
Unusual Fire/Explosion Hazard:CONTAINS ORGANIC PEROXIDE
Accidental Release
Spill Release Procedures:PROVIDE GOOD VENTILATION. AVOID EYE AND SKIN
CONTACT. SOAK UP SPILL WITH EARTH, SAND, OR ABSORBENT PRODUCT
(ZORBAL). RECOVER IN CONTAINER.
Handling
Handling and Storage Precautions:STORE BELOW 80F FOR PROLONGED SHELF
LIFE. STORE IN ORIGINAL CONTAINER.
Other Precautions:AVOID PROLONGED SKIN CONTACT.
Exposure Controls
Respiratory Protection:NOT NORMALLY NECESSARY, BUT PRODUCT SHOULD BE
USED IN AREAS OF GOOD VENTILATION.
Ventilation:LOCAL EXHAUST: YES
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USE.
Supplemental Safety and Health
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:<5 @ 30F
Spec Gravity:1.1 (WATER=1)
Solubility in Water:PARTIAL
Appearance and Odor:BROWN LIQUID, MILD ODOR
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING & REDUCING AGENTS
Hazardous Decomposition Products:CO, CO2, NITROUS OXIDES
Conditions to Avoid Polymerization:TEMPERATURES OVER 120F.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH STATE, FEDERAL, AND
LOCAL ANTI-POLLUTION AND WASTE DISPOSAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.